Water Purifier (Automatic RO/DI water)
|Model||SCSJ-III 15||SCSJ-III 30|
|Water Output Type||RO and DI water|
|Water Output Speed||15L/H||30L/H|
|Water Supply Requirement||Tap water: TDS<200ppm, 5~45°C, 1.0~4.0Kgf/cm2 (if inlet TDS>200ppm, extra pretreatment filter is recommended)|
|Purification System||Pretreatment unit||Special spun fiber filter *1,Special active carbon block filter *1, Special active carbon block filter *1|
|RO unit||100GPD RO membrane *1||100GPD RO membrane *2|
|Subsequent unit||Mixed bed resin cartridge *2||Mixed bed resin cartridge *3|
|TDS||RO water: 5~10 ppm|
|Control System||Automatic electronic pressure sensor controlling, RO membrane auto flushing, Automatic stop when water supply shortage, Automatic stop when water tank full, Automatic cutting off water when pump stop, 24 hours non-stop work|
|Water Quality Monitor||TDS meter,Online resistivity monitor(Optional)|
|Power Supply||AC110/220V±10%, 50/60Hz|
|Standard Configuration||Main body(include1 set cartridge),15Lwater tank,TDSmeter|
Hospital Infant Bed
Hospital Infant Bed. 1 Portable antibacterial and transparent basin is made of Acrylic plastic.2. Baby basin can tilt foreward and backwards. Height can be adjusted by hydraulic power. In-bed scale is optional. 5. Four castors at diameter 100mm with individual brake. Size: L780*W610*H780-980mm
Transfer Bed Type I
Patient Transfer Stretcher Trolley Size: L1950xW640xH580-825mm Functions: 1. HI-LOW: 580-825mm 2. Backrest max upward angle: 75° 3. Trendelenburg: 15° 4. Anti-trendelenburg: 15° 5. Loading capacity: 250kg Construction feature: 1. Steel frame, bottom platform is made of imported PP material 2. Up-down adjustable side rails are made of high quality ABS plastic. 3. The whole bed platform is made of advanced ABS, can be for X-ray penetrated. 4. Four dia.150mm castors with central braking system 5. The fifth castor is used for direction guide 6. Backrest is controlled by gas spring. 7. Hi-low , trendelenburg and anti-trendelenburg are controlled by hydraulic foot pedal. 8. Supplied with IV pole and oxygen bottle holder
Aluminum Alloy Folding Stretcher
Aluminum Alloy Folding Stretcher. L960*W400*H1850mm
Folding stretcher, foldable stretcher or collapsible stretcher as it is also known is frequently found in emergency situations for fast and safe patient removal purposes. As a leader in supply of emergency equipment, Medcare offers a wide series of folding stretchers. Our MT-F series foldable emergency stretchers provide outstanding versatility for the injured and patient transport in hospital, sports field, ambulance and army. They can be made to customer’s specifications and materials.
1. Casters or metal supports are available for effective bearing of the stretcher’s weight.
2. The maximum bearing weight is up to 159kg.
3. The medical stretcher can be folded in length and width to a compact size, with collapsible poles to enable fast opening.
4. It is coated with premium canvas or waterproof leathers that deliver high tensile strength and ease of cleaning.
5. The folding stretcher is constructed from 6063T5 aluminum alloy poles in 28-32mm diameter and 2.0-2.5mm wall thickness for high strength, ease of folding and carrying, and great unfolding stability.
Aluminium Emmergency Stretcher. Size: L1900*W550*H500mm. Emergency Stretcher
This separately-type stretcher is used for transferring bone fracture patient or serious injured patients.Lightweight aluminum alloy materials is convenient for carrying.
Both ends of the stretcher are equipped with separated device which can split the strercher into two parts.Easily and quickly pick up the patients from both sides of their body or take the stretcher off from their body without moving,avoid secondary injury.
Length of the strentcher can be adjusted freely according to requirements.Feet
section of the stretcher adopt narrow frame,solid apperance and easy to
operate.Ti is mainly used for hospotals,sports,ambulance for carrying
patients and wounded person.Yellow collor is optional.
ETCO2 Sidestream Module
The model CMY*** is a stable and reliable end-tidal CO2 module with high integrity, developed by CapnoMed Medical Co.,Ltd., adopting the non-dispersive infrared technology with two wavebands, the latest microprocessor and digital signal processing technique, and proven concentration algorithm. The module can accurately measure the concentration of the end-tidal CO2, the concentration of the inhaled CO2, respiratory rate, etc. with the CO2 curve diagram in a fast and exact manner. The model BA220 is perfectly applicable to person at different age group, such as baby, child and adult. The sampling flow rate is setup on the upper computer, and the minimum rate can be lowered to 50ml/min. The standard RS232 communication interface can help to quickly integrate the model KH*** with the monitor or other medical systems which need CO2.Characteristics
ETCO2 Mainstream Module
The model CMZ*** is a stable and reliable end-tidal CO2 module with high integrity, developed by CapnoMed Medical Co.Ltd., adopting the non-dispersive infrared technology with two wavebands, the latest microprocessor and digital signal processing technique, and proven concentration algorithm. The module can accurately measure the concentration of the end-tidal CO2, the concentration of the inhaled CO2, respiratory rate, etc. with the CO2 curve diagram in a fast and exact manner. The model BA210 is perfectly applicable to person at different age group, such as baby, child and adult. The sampling flow rate is setup on the upper computer, and the minimum rate can be lowered to 50ml/min. The standard RS232 communication interface can help to quickly integrate the model KH*** with the monitor or other medical systems which need CO2.
Emergency Capnograph Device
|Description||Compact, battery powered, quantitative capnograph for mainstream CO2 monitoring of adult, pediatric and infant patients.。|
|Measurements||CO2 partial pressure and respiratory rate|
|Measuring principle||2 channel NDIR type gas analyzer，No moving parts|
|Warm up||Waveform displayed within 10 seconds, meets specifications within 2 minutes (at 25°C room temperature)|
|Calibration||No routine calibration required|
|CO2 Range||0～99 mmHg
|CO2 Resolution||1mmHg or 0.1kPa or 0.1%|
|CO2 accuracy||0～40mmHg ±2 mmHg
41～99mmHg ±8% of readings
When RR is above 80 bpm ±12% of readings
|Drift of CO2 measurement
|Short drift: Less than 1 mmHg offset in 4 hours
Long drift: Meet measurement accuracy requirements within 120 hours
|CO2 noise||Noise RMS less than 1mmHg at 5% CO2|
|Total system response time||Less than 500ms|
|Recovery time after
|Respiratory rate||3～150 bpm|
|Respiratory rate accuracy||±1 bpm|
|ETCO2 Calculation Method||Peak of the expired CO2 waveform|
|Compensation||Built-in atmospheric pressure sensor, automatic pressure compensation|
|Display||128 *128 pixels 1.44 inch TFT color display|
|Dimensions||51 x 43 x 45 mm|
|Weight||<65 g (Included batteries)|
|Mechanical robustness||Withstands repeated 1 m drops.
Meets the shock and vibration requirements for transport of
EN ISO 80601-2-55:2011 clause 184.108.40.206.101.2 and
EN 1789:2007 clause 220.127.116.11 and 6.4.1.
|Operating conditions||Temperature：0 – 40 ℃
Atmospheric pressure：50-120 kPa
|Storage conditions||Temperature：-20 – 70 ℃
Atmospheric pressure：50-120 kPa